What is the Nautilus 200 Flood Wall Barrier?
The Nautilus 200 Flood Wall Barrier has been developed as a quick, convenient method of "building" a water tight flood barrier that can be easily erected in the event of a flood and also dismantled and stored away when the danger has passed.
Nautilus 200 Flood Wall Barrier - twist and lock post system
Suitable for installation to both residential and commercial property, Nautilus 200 Flood Wall Barrier makes use of two permanently-fixed vertical channels fitted either side of the opening to be protected, along with pre-installed unobtrusive ground fixtures to allow the Patented "Twist and Lock" post system (Patent No. 2371068) to be put in place. Aluminium panels are then dropped into position so that when deployed, a barrier up to 1200mm high for any required span in excess of 1500mm wide is ready to protect your property.
Component Parts of the Nautilus 200 Flood Wall Barrier
Nautilus 200 Flood Wall Barrier - Demountable Post
The demountable post is required for Nautilus 200 Barriers that span in excess of 2500mm wide and above 600mm high. The component is deployed into a pre-installed, unobtrusive ground insert (see Ground Insert & Post Cap) using our Patented Twist and Lock system.
As standard, the demountable post is manufactured in 180-degree (as shown) or 90-degree options for corners if required. As a bespoke option, the demountable post can be fabricated offset to meet non-standard angles.
Nautilus 200 Flood Wall Barrier - Ground Insert & Post Cap
The 120mm diameter ground insert acts as a socket for Nautilus 200 flood Wall installations involving the requirement for a demountable post. When the barrier is not deployed, a lockable post cap seal is used to protect the ground insert.
Nautilus 200 Flood Wall Barrier - Wall Rails & Panel Sealing Screws
The permanently fixed wall rails are available in two forms, either “reveal fix” which means fixing in between the reveals/brickwork of the doorway or “face fix” which means fixing onto the face of the brickwork. Each wall rail comes with a recess to accept a Wall Rail Compression Block (see Wall Rail Compression Blocks) and has a seal on the inner side to form the water tight seal when the Nautilus 200 Flood Wall is deployed. The panel sealing screws protrude horizontally through the fixed wall rails and demountable posts to secure the Aluminium panels against the rubber seals on the inside of the rails/posts to prevent any flood water ingress.
Nautilus 200 Flood Wall Barrier - Panel Extrusion
Each individual panel is 200mm high x 17mm thick and is supplied with rubber seals to prevent water ingress. As all Nautilus 200 Flood Wall barriers are manufactured to order, the Aluminium panel is cut to the required length.
Nautilus 200 Flood Wall Barrier - Wall Rail Compression Block
The compression block is inserted into a recess at the top of the fixed wall rails and is used to ensure adequate downward pressure is applied to each end of the barrier.
Nautilis 200 Flood Wall Barrier - Compression Post
The compression post is utilised for Nautilus 200 Flood Wall barriers that span over widths of 1500mm but less than 2500mm for heights up to 600mm. This component ensures that adequate downward pressure is applied along the entire barrier length.
CROCODILE STONE WATER GUARD
REPAIR AND RENEW GRANTS
FLOOD DEFENCE PRODUCTS